How do you replace halogen lamps with LED?
The best led stadium lights replacement for the halogen lamps sports field lighting buy with cheap cost tennis court lighting LED replace
LED have become a proxy for energy efficiency, so users are now choosing led for either newly installed lighting or replacement.Although the upfront investment will be higher than the cost of buying traditional lights, the overall cost of LED lighting system will be much less than that of HM lights, high-pressure sodium lights and other traditional lighting, and the effect will be a better level.However, how to replace the halogen lamp is the concern of users.
How to choose the right LED
To help you replace halogen bulbs, it is best to understand the difference between halogen and LED light.
Halogen lamp – In this incandescent bulb, the halogen filament surrounds the filament. It is similar in operation and attractiveness to conventional incandescent lamps.
LED- This is a semiconductor lamp that is illuminated by energy.
Now you know the difference between the two lighting solutions, which is how to replace halogen lamps with LED lights.
1.Peer output replacement
When replacing a halogen bulb, the first consideration is the equivalent output. Use lumens to measure the brightness of light. Unfortunately, calculating lumens is confusing and tricky.There is a simple way to measure the lighting output; Kelvin is used to measure the temperature of light.
The lower the kelvin number, the warmer the light. For people in cold climates, 2700 K light is the right choice. On the other hand, in warm areas, a large number of Kelvin should be chosen.
To measure the power output, you will have to use lumens. Halogen bulbs have lumens ranging from 14 to 20 lm/W. In this way, halogen bulbs produce 500 x 14 = 7,000 lumens. You must convert lumens to watts, 7000/140 = 50 W. Keep in mind that LED lumens per watt are 10 times more than halogen bulbs.Therefore, to replace a 500 W halogen LED, you will need 50 W to 100 W.
Each traditional bulb has a different lm/W value.Therefore, if you have a clear understanding of the equivalent output, contact an expert at Green Light.
2.Appropriate beam Angle
Another factor that you must focus on is the beam Angle of the light. For those who don’t know, the Angle of the beam represents the Angle at which the light is emitted.Today, LED lights offer a variety of angles to meet the needs of different customers
There are unidirectional and omnidirectional LED lights. When the maximum beam Angle is 180 degrees, one-way light can cover a specific area.In an omnidirectional LED, light is emitted in all directions.
The beam Angle is related to the application of LED lamps.This means that you must consider the purpose of the LED to determine the beam Angle. For example, if you need LED lights for safety reasons, omni-directional lights are recommended.
If you want to use LED lights for focal lighting, it is best to invest in small beam Angle lights. For basic lighting, you can choose a one-way LED.
Pls check the blew link to see the product detail information:
3.Use dimmer LED lights
There was a time when dimming LED were considered unreliable. This is because many people complain that their lights are flashing instead of dimming. The problem with these lamps is their circuitry. Not all lights are dimmable, so you must make sure that LED lights can be dimmed.
The flicker problem can be solved by changing the switch.Sometimes, normal dimmer switches cannot be used with LED lights. Therefore, it is best to switch to the frontier switch.
4.The value of LED lights
Many people avoid switching to LED. One reason is the price. There is no doubt that led are expensive compared to halogen bulbs. People should focus on the long-term benefits they provide, not the price of LED.
If you stick with traditional lighting, you may save at first, but you must spend it on your electricity bill.The first advantage of using LED lights is that they reduce power.That means light will use less energy, saving a lot of money on electricity bills.
Also, LED lights have a long life, which will reduce maintenance costs.This is because you don’t have to replace LED lights often.Thus, these benefits will compensate for the initial cost.
The advantage of using LED lights instead of halogen lamps
Here are some of the benefits of halogen lamp replacement:
1.The LED light is on and on instantly
One of the benefits of using LED lights is that they don’t take time to warm up. This means led can be turned on and off immediately.
2.LED does not flash
LED lighting has a flicker rate of 0.35%, which means you won’t see any flicker in a high-speed camera.
3.Energy saving
LED lamps have high energy efficiency, lighting efficiency is 10 times higher.
That means you’ll need fewer watts of light, which will use less energy and help save on electricity bills.
4.Longer lifespan
LED lamps last longer than halogen bulbs.
The average life of LED lights is about 80,000 to 100,000 hours.
Things to avoid when changing halogen lamps
There are many aspects to consider when replacing halogen lamps with LED lamps. A slight mistake may lead to failure.Therefore, caution must be exercised when replacing halogen lamps with led.
1.Contrast brightness levels
One of the most common mistakes is not paying attention to the brightness level. Lumens are a unit used to measure brightness.You must compare the output of lumens to find out the required LED brightness.
2.Differences between manufacturers
The number of manufacturers has increased because of the rapid popularity of LED lights. Not all manufacturers are reliable and can provide quality products.Therefore, you must check the supplier before buying LED lights.
3.Importance of light distribution
Another thing to remember is that each light source has a different light distribution.The environment of a room is related to the scattering of light.If you replace the halogen LED, you will encounter a spotlight.This is because led produce more direct light than conventional lighting. Therefore, it is important to pay attention to the light distribution of lighting.
Pls check the blew link to see the product detail information:
4.Interpretation of CCT or CRI
You should be familiar with two terms: CRI and CCT. Color rendering index (CRI) is the ability of a light to provide color. It is evaluated between 0 and 100.For LED lights, the CRI value ranges from 70 to 90. For outdoor use, CRI 70 is ideal, while for venues requiring broadcast coverage, it is best to exceed 90.
Color temperature (CCT) is used to determine the coolness and warmth of LED lights. It’s in kelvin. To use attractive lighting, the color temperature must be between 2700 K. In the workplace, use LED lights with a color temperature of 3000 K. For museums or art galleries, color temperature of 5000 K is preferred.
5.Quality assurance capability
When buying LED lights, you must check that the manufacturer has provided warranty.It is recommended to check the warranty period.The warranty for Green Light LED is specific for 5 to 10 years.
6.Specification for dimmers to be used together with LED lights
As mentioned above, if you use the wrong dimer on the LED light, it will blink or buzz.
This is because each dimmer is different and cannot be used with each LED. Therefore, you must ensure that the dimmer works well under LED lights.
Conclusion
We hope this guide will help you replace your halogen lamps. By keeping these things in mind, you can make the whole replacement process easier.Green Light LED is a high quality LED lamp supplier for high power applications. If you need help with lighting system design. Please contact our Green Light team.[email protected].